[PORTABLE] Full WinTV 7 CD 1.1

[PORTABLE] Full WinTV 7 CD 1.1

DOWNLOAD >> https://fancli.com/2t83Sa

When initially starting the application under Windows 10, you'll probably find that the interface loads fine and their is sound, but no picture - just a black screen. Interestingly, recordings made from WinTV v7 will play in VideoLan's excelllent media player - VLC, with full video, so it is pretty clear that things are nearly working.

Ugh, that wasn't my brightest moment. Sorry about that. I loaded both modules as root successfully. Unfortunately that didn't fix the issue yet. Question - once I load those modules, do I need to re-insert the tuner in order for things to have a chance of working? If so, I'll need to open up my chasis and remove the tuner as it's an internally mounted. Not a big deal.

After four hours of banging my head against the wall after successfully getting the tuner to work on my wife's xubuntu laptop in about 5 minutes, I finally changed my internet search phrases from being centered around Hauppauge and Arch to centered around Live TV and Kaffeine. Found the solution in 5 minutes from this archived Manjaro forum post.

WinTV-HVR-950 brings analog cable TV and over-the-air ATSC digital TV to your PC or laptop! Watch and record TV in a window or full screen using high quality MPEG-2. Use our TV scheduler to record you favorite analog or digital TV shows. Play your TV recordings back to your screen any time.

0000000000100000 - 0000000027ff0000 (usable) BIOS-e820: 0000000027ff0000 - 0000000027ff8000 (ACPI data) BIOS-e820: 0000000027ff8000 - 0000000028000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)639MB LOWMEM available.found SMP MP-table at 000fbdb0On node 0 totalpages: 163824 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 159728 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1DMI 2.3 present.ACPI: RSDP (v000 AMI ) @ 0x000fc9a0ACPI: RSDT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x27ff0000ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x27ff0030ACPI: MADT (v001 AMIINT VIA_P6 0x00000009 MSFT 0x00000097) @ 0x27ff00b0ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000d) @ 0x00000000ACPI: PM-Timer IO Port: 0x808ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)Processor #0 6:8 APIC version 17ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Enabling APIC mode: Flat. Using 1 I/O APICsUsing ACPI (MADT) for SMP configuration informationBuilt 1 zonelistsKernel command line: root=/dev/hdb1 ro quiet splash acpi=noapicmapped APIC to ffffd000 (fee00000)mapped IOAPIC to ffffc000 (fec00000)Initializing CPU#0PID hash table entries: 4096 (order: 12, 65536 bytes)Detected 868.937 MHz processor.Using pmtmr for high-res timesourceConsole: colour VGA+ 80x25Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 641692k/655296k available (1435k kernel code, 12924k reserved, 755kdata, 224k init, 0k highmem)Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay loop... 1720.32 BogoMIPS (lpj=860160)Security Framework v1.0.0 initializedSELinux: Disabled at boot.Mount-cache hash table entries: 512 (order: 0, 4096 bytes)CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 0000000000000000CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 0000000000000000CPU: L1 I cache: 16K, L1 D cache: 16KCPU: L2 cache: 256KCPU serial number disabled.CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000CPU: Intel Pentium III (Coppermine) stepping 06Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Checking 'hlt' instruction... OK.Checking for popad bug... OK.ACPI: Looking for DSDT in initrd... not found!ENABLING IO-APIC IRQs..TIMER: vector=0x31 pin1=2 pin2=-1checking if image is initramfs...it isn't (bad gzip magic numbers); looks likean initrdFreeing initrd memory: 4300k freedNET: Registered protocol family 16EISA bus registeredPCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1PCI: Using configuration type 1mtrr: v2.0 (20020519)ACPI: Subsystem revision 20050211ACPI: Interpreter enabledACPI: Using IOAPIC for interrupt routingACPI: PCI Root Bridge [PCI0] (00:00)PCI: Probing PCI hardware (bus 00)PCI: Via IRQ fixupACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: Power Resource [URP1] (off)ACPI: Power Resource [URP2] (off)ACPI: Power Resource [FDDP] (off)ACPI: Power Resource [LPTP] (off)ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initpnp: PnP ACPI: found 10 devicesPnPBIOS: Disabled by ACPI PNPPCI: Using ACPI for IRQ routing** PCI interrupts are no longer routed automatically. If this** causes a device to stop working, it is probably because the** driver failed to call pci_enable_device(). As a temporary** workaround, the "pci=routeirq" argument restores the old** behavior. If this argument makes the device work again,** please email the output of "lspci" to ** so I can fix the driver.audit: initializing netlink socket (disabled)audit(1110706298.404:0): initializedVFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)devfs: 2004-01-31 Richard Gooch ()devfs: boot_options: 0x0Initializing Cryptographic APIPCI: Enabling Via external APIC routingisapnp: Scanning for PnP cards...isapnp: No Plug & Play device foundserio: i8042 AUX port at 0x60,0x64 irq 12serio: i8042 KBD port at 0x60,0x64 irq 1Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabledttyS0 at I/O 0x3f8 (irq = 4) is a 16550AttyS1 at I/O 0x2f8 (irq = 3) is a 16550AttyS0 at I/O 0x3f8 (irq = 4) is a 16550AttyS1 at I/O 0x2f8 (irq = 3) is a 16550Aio scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registeredRAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksizeinput: AT Translated Set 2 keyboard on isa0060/serio0EISA: Probing bus 0 at eisa0EISA: Detected 0 cards.NET: Registered protocol family 2IP: routing cache hash table of 8192 buckets, 64KbytesTCP: Hash tables configured (established 262144 bind 65536)NET: Registered protocol family 8NET: Registered protocol family 20Restarting tasks... Strange, kswapd0 not stopped Strange, kseriod not stopped doneACPI wakeup devices:PCI0 UAR1 UAR2 USB USB1 AC9 MC9 SLPBACPI: (supports S0 S1 S4 S5)RAMDISK: cramfs filesystem found at block 0RAMDISK: Loading 4300KiB [1 disk] into ram disk... done.VFS: Mounted root (cramfs filesystem) readonly.Freeing unused kernel memory: 224k freedACPI: Processor [CPU1] (supports 16 throttling states)NET: Registered protocol family 1Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: IDE controller at PCI slot 0000:00:07.1VP_IDE: chipset revision 6VP_IDE: not 100% native mode: will probe irqs laterVP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMAProbing IDE interface ide0...hda: IBM-DTLA-307015, ATA DISK drivehdb: SAMSUNG SV8004H, ATA DISK driveelevator: using anticipatory as default io scheduleride0 at 0x1f0-0x1f7,0x3f6 on irq 14hda: max request size: 128KiBhda: 30003120 sectors (15361 MB) w/1916KiB Cache, CHS=29765/16/63, UDMA(100)hda: cache flushes not supported /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >hdb: max request size: 128KiBhdb: 156368016 sectors (80060 MB) w/1945KiB Cache, CHS=65535/16/63, UDMA(100)hdb: cache flushes supported /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 >Probing IDE interface ide1...hdc: TDK CDRW161040X, ATAPI CD/DVD-ROM drivehdd: HITACHI DVD-ROM GD-7500, ATAPI CD/DVD-ROM driveide1 at 0x170-0x177,0x376 on irq 15Probing IDE interface ide2...Probing IDE interface ide3...Probing IDE interface ide4...Probing IDE interface ide5...Stopping tasks: ==|Freeing memory... done (456 pages freed)Restarting tasks... doneVFS: Can't find ext3 filesystem on dev hdb1.VFS: Can't find an ext2 filesystem on dev hdb1.ReiserFS: hdb1: found reiserfs format "3.6" with standard journalReiserFS: hdb1: using ordered data modeReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: hdb1: checking transaction log (hdb1)ReiserFS: hdb1: Using r5 hash to sort namesAdding 511520k swap on /dev/hdb5. Priority:-1 extents:1hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB CacheUniform CD-ROM driver Revision: 3.20hdd: ATAPI 40X DVD-ROM drive, 512kB Cacheparport_pc: VIA 686A/8231 detectedparport_pc: probing current configurationparport_pc: Current parallel port base: 0x378parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]parport_pc: VIA parallel port: io=0x378, irq=7lp0: using parport0 (interrupt-driven).mice: PS/2 mouse device common for all miceinput: ImPS/2 Generic Wheel Mouse on isa0060/serio1Capability LSM initializedts: Compaq touchscreen protocol outputdevice-mapper: 4.3.0-ioctl (2004-09-30) initialised: md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27cdrom: open failed.cdrom: open failed.ReiserFS: hdb7: found reiserfs format "3.6" with standard journalReiserFS: hdb7: using ordered data modeReiserFS: hdb7: journal params: device hdb7, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: hdb7: checking transaction log (hdb7)ReiserFS: hdb7: Using r5 hash to sort namesReiserFS: hdb6: found reiserfs format "3.6" with standard journalReiserFS: hdb6: using ordered data modeReiserFS: hdb6: journal params: device hdb6, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: hdb6: checking transaction log (hdb6)ReiserFS: hdb6: Using r5 hash to sort namesReal Time Clock Driver v1.12input: PC Speakerinserting floppy driver for 2.6.10-4-386Floppy drive(s): fd0 is 1.44MFDC 0 is a post-1991 82077Linux agpgart interface v0.100 (c) Dave Jonesagpgart: Detected VIA Apollo Pro 133 chipsetagpgart: Maximum main memory to use for agp memory: 564Magpgart: AGP aperture is 64M @ 0xe0000000cpci_hotplug: CompactPCI Hot Plug Core version: 0.2pci_hotplug: PCI Hot Plug PCI Core version: 0.5Evaluate _OSC Set fails. Status = 0x0005pciehp: add_host_bridge: status 5pciehp: Fails to gain control of native hot-plugshpchp: shpc_init : shpc_cap_offset == 0shpchp: Standard Hot Plug PCI Controller Driver version: 0.4usbcore: registered new driver usbfsusbcore: registered new driver hubUSB Universal Host Controller Interface driver v2.2ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 16 (level, low) -> IRQ 16uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controlleruhci_hcd 0000:00:07.2: irq 16, io base 0xd800uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1hub 1-0:1.0: USB hub foundhub 1-0:1.0: 2 ports detectedACPI: PCI interrupt 0000:00:07.3[D] -> GSI 16 (level, low) -> IRQ 16uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)uhci_hcd 0000:00:07.3: irq 16, io base 0xdc00uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2hub 2-0:1.0: USB hub foundhub 2-0:1.0: 2 ports detectedusb 1-1: new full speed USB device using uhci_hcd and address 2SCSI subsystem initializedInitializing USB Mass Storage driver...usb 1-2: new full speed USB device using uhci_hcd and address 3scsi0 : SCSI emulation for USB Mass Storage devicesusbcore: registered new driver usb-storageUSB Mass Storage support registered.usb-storage: device found at 2usb-storage: waiting for device to settle before scanningusb 2-1: new low speed USB device using uhci_hcd and address 2usb 2-2: new full speed USB device using uhci_hcd and address 3ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 16 (level, low) -> IRQ 16hub 2-2:1.0: USB hub foundhub 2-2:1.0: 4 ports detectedgameport: CS416x Gameport on pci0000:00:0e.0 speed 1864 kHzdrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1proto 2 vid 0x03F0 pid 0x0317usbcore: registered new driver usblpdrivers/usb/class/usblp.c: v0.13: USB Printer Device Class driverusbcore: registered new driver hiddevinput: USB HID v1.00 Mouse [04b3:310b] on usb-0000:00:07.3-1usbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.0:USB HID core driverusb 2-2.1: new full speed USB device using uhci_hcd and address 4Linux video capture interface: v1.00bttv: driver version 0.9.15 loadedbttv: using 8 buffers with 2080k (520 pages) each for capturebttv: Bt8xx card found (0).ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 17 (level, low) -> IRQ 17bttv0: Bt878 (rev 2) at 0000:00:0f.0, irq: 17, latency: 64, mmio: 0xdebfe000bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13ebbttv0: using: Hauppauge (bt878) [card=10,autodetected]bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] Vendor: ST36531A Model: Rev: 0811 Type: Direct-Access ANSI SCSI revision: 00usb-storage: device scan completebttv0: Hauppauge eeprom: model=61204, tuner=Philips FI1216 MK2 (5), radio=nobttv0: using tuner=5bttv0: i2c: checking for MSP34xx @ 0x80... not foundbttv0: i2c: checking for TDA9875 @ 0xb0... not foundbttv0: i2c: checking for TDA7432 @ 0x8a... not foundtvaudio: TV audio decoder + audio/video mux drivertvaudio: known chips:tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54(PV951),ta8874zbttv0: i2c: checking for TDA9887 @ 0x86... not foundSCSI device sda: 12706470 512-byte hdwr sectors (6506 MB)sda: assuming drive cache: write throughSCSI device sda: 12706470 512-byte hdwr sectors (6506 MB)sda: assuming drive cache: write through /dev/scsi/host0/bus0/target0/lun0:tuner: chip found at addr 0xc2 i2c-bus bt878#0 [sw]tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 [sw] p1Attached scsi disk sda at scsi0, channel 0, id 0, lun 0bttv0: registered device video0bttv0: registered device vbi0bttv0: PLL: 28636363 => 35468950 .. okACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 17 (level, low) -> IRQ 17ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 19 (level, low) -> IRQ 193c59x: Donald Becker and others. www.scyld.com/network/vortex.html0000:00:11.0: 3Com PCI 3c905C Tornado at 0xd400. Vers LK1.1.19ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 19 (level, low) -> IRQ 19NET: Registered protocol family 17NET: Registered protocol family 10Disabled Privacy Extensions on device c02f0500(lo)IPv6 over IPv4 tunneling driverACPI: Power Button (FF) [PWRF]ACPI: Sleep Button (CM) [SLPB]ibm_acpi: ec object not foundapm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)apm: overridden by ACPI.eth0: no IPv6 routers presentReiserFS: sda1: found reiserfs format "3.6" with standard journalReiserFS: sda1: using ordered data modeReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: sda1: checking transaction log (sda1)ReiserFS: sda1: Using r5 hash to sort names 2b1af7f3a8